High Percision Steam Pressure Autoclave AAC Autoclave / AAC Block
1.High Percision Steam Pressure Product Description:
1)The autoclave is the large pressure vessel that can steam the
pressurized bricks or normal bricks which is made from aerated
concrete blocks, sand and pulverized fly ash, and then complete the
reaction of Cao-SiO2-H2O.
2)the autoclave is also widely used in other productions that need
to be steamed with high pressure. Autoclave is key equipment which
has a widely application in building material factory to autoclaved
cure different kinds of building materials. It is also used in
areas of chemical, textile, wood, Glass, Brick, metallurgy, Rubber,
military industry. Convenient operation, security and reliable are
a) Q345R-GB713 of Hangang in Hebei.
b) 16MnIIlevel of making flange forging
c) φ133×25 tube to make DN100 and the material is 20-GB9948.
a) After welding kettle door, it must proceed with annealing heat
b) Polish toothed cutter of flange of autoclave body, and carry out
magnetic particle testing.
c) Use double scale container board, and ensure the longitudinal
joint of each section.
d) Carry out the physical and chemical test (stretch, impact),
ensure its strength.
e) Welds are 100% X-ray detection, then carry out hydraulic test of
2.1MPa after passing. The whole process is complete inspected by
CSEI factory inspection, and leave factory after stamp and
4. Security Measures:(Triple Security)
a).Hand speed reducer installs mechanical interlocking, and we
don't move when there's pressure in kettle.
b).Equip with manual limited safety interlocking device, stuck
kettle manually, then we can open the door.
c).Equip with electric limited safety interlocking device, using
cooperatively with manual limit, and connect with electric cabinet,
rotating electrical ark with pressure and sound-light alarm.