Sign In | Join Free | My burrillandco.com
Home > AAC Block Machine >

Thermal Insulation Of Building Material AAC Sand Lime Block AAC Fly Ash Block Machine

Changzhou Mingjie Building Material Equipment Manufacturing Co.,Ltd
Changzhou Mingjie Building Material Equipment Manufacturing Co.,Ltd
City: Changzhou
Province/State: Jiangsu
Country/Region: China
Tel: 86-519-68880160
Contact Person:
Mr Peter.Fly
    Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers
     
    Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers
    • Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers
    • Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers
    • Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers
    • Buy cheap Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine from wholesalers

    Thermal Insulation Of Building Material AAC Sand Lime Block AAC Fly Ash Block Machine

    Ask Lasest Price
    Brand Name : MINGJIE
    Model Number : QKJQ-0010
    Certification : ISO9001:2008
    Price : negotiable
    Payment Terms : T/T or L/C
    Supply Ability : 30sets/year
    Delivery Time : 45days after deposit
    • Product Details
    • Company Profile

    Thermal Insulation Of Building Material AAC Sand Lime Block AAC Fly Ash Block Machine

    Thermal Insulation Of Building Material AAC Sand Lime Block AAC Fly Ash Block Machine


    Raw Materials
    The main materials are sand, cement, lime and aluminum powder.

    1. Cement
    425 # cement shall be acceptable.

    2. Sand or Fly Ash
    The sand shall be requested as standard JC/T 622<sand for silicate building products>, The more quartz content, the better result of production.

    Table3-1 Chemical content of sand

    Chemical

    Class

    SiO2 %

    K2O+Na2O
    %

    Organic compound

    Mica %

    SO3 %

    Mud %

    H2O%

    excellent

    ≥85

    ≤1

    Suitable

    ≤0.5

    1

    3

    8

    I

    ≥75

    ≤3

    5

    II

    ≥65

    ≤5

    ≤1

    2

    8


    Table3-2 Granulation of sand

    Granulation
    Class

    Percent %

    Excellent

    I-Class

    II-Class

    2.5~5.0(Round hole)

    0

    0

    1.25~2.5(Square hole)

    10

    10

    0.16~0.25(Square hole)

    60

    45

    <0.16(Square hole)

    30

    45


    3. Lime
    The lime shall be requested as JC/T 621-2009<lime for silicate building products

    4. Aluminum powder
    The aluminum powder shall be requested as JC/T 407-2008<aluminum powder for AAC


    General Processing Description

    1. After crushing, the lime & gypsum grains are stored in vertical silo, the granularity should be no more than 25mm. Then the grains are fed into ball mill by separate belt scale, and will be sent to granular cementation silo when granularity reaches 3500~4000cm2/g.

    2. Mill the sand to slurry in wet ball mill and put the slurry into tank for storage.

    3. Add the sand slurry, granular cementation materials & cement which are scaled as per proportion into the casting tank equipped with stirrer for mixing, a certain amount of steam should be entered into the stirrer for increasing the raw materials temperature to 40~45℃.

    4. After mixing of 3~4min, open the discharger valve of aluminum powder, feeding into the tank, and continue mixing about 40 seconds, then pour the mixed slurry into mould for casting. The whole cycle is 6~8min.

    5. Transport the casting cake with mould to curing zone for foaming and concreting, environment temperature is 40~45℃ and curing time is 90~150min; and then pull out them from the curing zone when the strength reach the lowest cutting strength.

    6. Transport the mould with casting cake to cutting zone. A titling machine separates the cake from the mould and put the cake onto loading car after 90 degree overturning. After vertical cutting & cross cutting the cake turns into blocks (L ± 3mm ~ W ± 1.5mm ~ H ± 0.6mm), then the ground turning device turns 90 degree and place the blocks onto autoclave base plate.

    7. The loading car transports the cakes into autoclave with temperature 190℃ and steam pressure 1.2MPa, autoclaving cycle is 12H. The tail steam of the autoclave will be recycled into other autoclaves and/or to curing zone by pipe for completely utilization.

    8. After autoclaving, the blocks are put in different stacks, and the separate moulds are transported to mold cleaning zone for cleaning and continuously production.

    9. The waste materials will be collected into a waste slurry tank, where mixed with fresh materials in a correct proportion for further production.


    5. Technological data

    Mixing cycle: 6 ~ 7 minutes

    Casting temperature: 40 ~ 45℃

    Curing time: 2.5 ~ 3.0h

    Environment temperature for curing: 45 ~ 55℃

    Autoclave loading /unloading: 0.5h

    Vacuuming: 0.5h (0 ~ -0.05MPa)

    Pressure up: 1.5h (0.06 ~ 1.2 MPa)

    Constant pressure: 7h (1.2 MPa)

    Pressure down: 1.5 h (1.2 ~ 0MPa)

    Total: 11h





    Quality Thermal Insulation Of Building Material AAC Sand Lime Block  AAC Fly Ash Block Machine for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: Changzhou Mingjie Building Material Equipment Manufacturing Co.,Ltd
    Subject:
    Message:
    Characters Remaining: (0/3000)
     

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2018 burrillandco.com. All rights reserved.